Entrust Sigma DS4, Руководство пользователя

Страница: 18 / 30

10 About the Rear Indent Module (RIM)
Load the Indent Ribbon Cassette
1.
Press the power button to power down the printer.
2.
Unlock the RIM and open the side access door.
3.
Remove the supply cassette from the shipping bag and position
the cassette as shown.
4.
Turn the left spool clockwise to remove any slack in the supply.
Look into the cassette to ensure that the slack is removed from
both spools and the ribbon.
5.
Position and push in the supply cassette as shown to install it into
the RIM.
The RIM ribbon cassette installed. Message 304, RIM supply out, displays on the
printer LCD if a cassette is not installed.
The ribbon cassette contains a one-time-use roll of indent ribbon.
Make sure the ribbon is installed under the anvil feature located beneath the supply
posts.
Cassette Front
Anvil
Anvil
Supply
Cassette
Ribbon