Entrematic EM EMSW, Руководство пользователя и инструкции по эксплуатации

Страница: 7 / 14

Regular safety checks
To help you fulfil the national/international requirements and to avoid malfunction and risk for in-
juries, we have provided the following checklist.
Do not use the operator if repair or adjustment is necessary.
Disconnect supply when cleaning or other maintenance is to be carried out.
If problem
occurs
Daily Action
Activate your operator and check visually, fastening and any damage of
•
operator
• arm system
• cables
• hinges
• door and glass
Also inspect your operator and check visually for
•
sharp edges on the door leaf and door frame (if any)
• condition of door seals
• finger protection
• and finally that the complete door runs properly and closes slowly in a smooth way
Set the mode selector to OFF and check that the operator and electromechanical lock (if fitted) work
together. Also check that the lock really secures the door.
Activate the manual activation units , if any, and walk towards the door. Check that the door has
opened appropriately while you pass the entrance/exit.
Then proceed with the automatic activation units in the same way.
Check the safety sensors if any, by standing in the swing path and activate the operator.
The door must not hit you when opening nor when closing.
If you are unsure of which type of sensor you have, please contact your Entrematic Group represent-
ative.
Set the programme selector in AUTO mode. Push the door manually
in escape direction and make sure that no object or function will pre-
vent the door from opening. Also make sure the escape route is free
for use. By law, these
tests must
be per-
formed regu-
Escape
doors
larly by
Let the door close after an impulse ensuring nothing prevents the door
from closing and locking (if regulations require it).
Fire
doors
trained per-
sonnel.
Take appropriate measures. =
Contact your Entrematic Group representative. For contact information, see last page. =
7 Issue 2019-06-11 1004131-EMen-12.0