Entrematic Ditec KS200HD, Руководство по установке

Страница: 99 / 122

3.2.10 Checking and adjusting the belt tension
a Loosen the fixing screw (32) without removing it.
b Screw the adjustment screw (33) to its outmost position.
c Tension the tooth belt (18) by pulling the tension wheel assembly (15) by hand. Tighten the
screws (12) with a torque of 6 Nm.
d Tighten the adjustment screw (33) until there is a gap of approx. 1-2 mm between the lock nut
(34) and the bracket according to illustration below, but not further. Be sure not to overtighten,
otherwise the adjustment screw (33) might damage the tension wheel (31).
e Retighten the fixing screw (32) with a torque of 10 Nm.
Note! Do not make any adjustment on the lock nut (34).
31 18 32 33
2
15
12
34
1-2 mm
Beam 2
Screw: M5x10 12
Tension wheel assembly 15
Tooth belt 18
Tension wheel 31
Fixing screw 32
Adjustment screw 33
Lock nut 34
99 Issue 2019-12-24 1019202-DIen-2.0
3 Mechanical installation