Hydra HD – B Series User’s Guide
Copyright
2008 Entone, Inc. All rights reserved
.
33
REMOTE CONTROL REGISTRATION
You must install the RF remote control antenna before doing the registration.
1. Press and hold the “OK” button on the Hydra front panel for approx. 5 seconds. When releasing the
“OK” button, the Hydra front panel will display “RC REG”. The Hydra is now in remote registration
mode.
Figure 10-4 Hydra in Remote Registration Mode
2. On the URC PLUS, press and hold the “STB” button for approx. 5 seconds. The “STB” button backlight
will illuminate.
Figure 10-5 URC PLUS in Remote Registration Mode – Step 1
On the URC PLUS, press “STB” once again. Both the “STB” and “AUX” button backlight will illuminate.
Figure 10-6 URC PLUS in Remote Registration Mode – Step 2
Figure 10-7 URC PLUS in Remote Registration Mode – Step 3
Now the URC PLUS is in registration mode.