EN
TI
TY FS
60 2-BI
KE S
TAND
8
CAUTION
1. Install FS60 bike stand against a ceiling joist or beam. Never
install against a fragile ceiling or on a non-solid or rough
surface.
2. Always make sure Middle Tube and Upper Tube are securely
locked in place. Improper fastening may cause QR clamp lever
and tension bolts to loosen resulting in collapse of stand.
3. Always balance bike on its hook.
4. When removing or repositioning FS60 bike stand always
remember to remove the bike(s)!
5. The adjusting knob should not be overtightened.
6.
If unable to loosen adjusting knob, loosen mounting bolts first,
then loosen adjusting knob.
7. Hold main tube securely when removing or repositioning FS60
bike stand.
8. The maximum height of the FS60 bike stand is 3.4m. Please
measure height of your ceiling from floor before installing.
9. Maximum weight capacity per Hook Unit is 25kg.
10. No more than one bicycle may be hung on each hook.
11. Caution should be taken when mounting the FS60 bike stand
in areas with high vibration either near the base or the top
of the FS60 bike stand. Automatic garage door openers, air
compressors, etc., may cause enough vibration to cause the
FS60 bike stand to move. Periodically check the stability of
the FS60 bike stand if near a vibration source to ensure safe
storage of your bicycles.
12. Check the stability of the FS60 bike stand by lightly pulling and
pushing the vertical bar. Remove any bicycles on the FS60 bike
stand before testing stability. The foot or top should not be able
to move when in the locked position. If the FS60 bike stand is
loose, reinstall the main unit and test again. Periodically check
the stability of the FS60 bike stand to ensure safe storage of
your bicycles.
