Entity E100 Series, Руководство пользователя

Страница: 12 / 14

E-BI
KE S
YSTEM - E100 S
ERI
ES
E-BI
KE S
YSTEM - E100 S
ERI
ES
20 21
• Products are not guaranteed against natural wear and
deterioration from normal use and aging.
• For maximum performance we highly recommend ENTITY
lubricants and maintenance products.
CONFIGURATION SETTINGS
It is possible to change the configuration settings on the display.
Contact your dealer for more information. This has been set for
your region by your dealer or manufacturer.
TROUBLESHOOTING
If the suggested remedy does not solve the problem, please
contact your dealer.
SYMPTOM POSSIBLE CAUSE REMEDY
Assistance not
being provided
Is the battery /
system turned on
Use the switch on the battery
to turn it on. Then hold the M
button on the display to turn
the entire system on
Is the battery
charged
Charge the battery
Battery maybe over
heating
If you are riding in hot
weather, up inclines or with
a heavy load. Wait until the
battery cools down
Over Speeding
The assistance will stop after
reaching 25km/hr
Not pedaling
The bicycle is not a motor
bike, and pedalling is required
The assist level set 0
Set the assistance from 1-5
Assistance
range is too
short
Low battery capacity
Charge battery
Low tyre pressures
Increase tyre pressures to
correct settings
Poor gear change
Change gears according to
the terrain
Lower the assistance
level
Lower assistance leves will
increase range
Lights using power
Don’t use lights during the
day
Over time battery
performance will
degrade
Replace the battery