manualshive.com logo in svg

Enterasys X-Pedition 2000, Руководство по началу работы

Поделиться
Скачать
Enterasys X-Pedition 2000 Скачать руководство пользователя страница 69

Enterasys X-Pedition 2000 Getting Started Guide

53

Setting SYSLOG Parameters

6.

Use the following command to “add” one or more DNS servers to the XP-2000:

where <IP-address> is the IP address of the DNS server. You can specify up to three DNS 
servers.

Note:

If you specify more than one IP address, you must separate the addresses with a space 
and surround them with a single pair of quotes. You do not need to surround a single 
IP address with quotes.

7.

Enter the save active command to activate the commands and enter yes or y to activate the 
changes.

Here is an example of the commands above featuring the addition of two DNS server IP 
addresses:

8.

Enter the system show dns command to verify the new DNS settings, as shown in the 
following example:

9.

Use the ping command to verify that the XP-2000 can resolve the DNS server name into its IP 
address, as shown in the following example:

Setting SYSLOG Parameters

The CLI can use SYSLOG messages to communicate the following types of messages to a 
SYSLOG server:

•

Fatal – Provide information about events that caused the XP-2000 to crash and reset.

•

Error – Provide information about errors.

system set dns server 

["]<IP-address> [<IP-address>] [<IP-address>]["]

xp-1# config
xp-1(config)# system set dns domain “mktg.company.com”
xp-1(config)# system set dns server “10.50.11.12 10.50.12.11"
xp-1(config)# save active

xp-1# system show dns
DNS domain: mktg.company.com, DNS server(s): 10.50.11.12 10.50.12.11

xp-1# ping xp1
PING xp-1.mktg.company.com (10.50.11.12): 56 data bytes
64 bytes from 10.50.11.12: icmp_seq=0 ttl=255 time=0 ms

--- xp-1.mktg.company.com ping statistics ---
1 packets transmitted, 1 packets received, 0% packet loss
round-trip min/avg/max = 0/0/0 ms

Содержание X-Pedition 2000























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды