Enterasys Security Information and Event Manager, Руководство по настройке

Страница: 151 / 426

Configuring DSMs
IBM Lotus Domino 135
• Set up the SNMP servers. See Setting Up SNMP Services .
• Start the Domino Server add-in tasks. See Starting the Domino Server Add-in
Tasks .
• Configure the SNMP services. See Configuring SNMP Services
Setting Up SNMP
Services
To set up the SNMP services on the IBM Lotus Domino server:
Step 1
Install the Lotus Domino SNMP Agent as a service. From the command prompt, go
to the Lotus\Domino directory and type the following command:
Insnmp -SC
Step 2
Confirm that the Microsoft SNMP service is installed.
Step 3
Start the SNMP and LNSNMP services. From a command prompt, type the
following commands:
net start snmp
net start lnsnmp
Step 4
Select Start > Program > Administrative Tools > Services to open the Services
MMC
Step 5
Double-click on the SNMP service and select the Traps tab.
Step 6
In the Community name section, type the following in the space available and click
add to list :
public
Step 7
In the Traps destinations section, select Add and type the IP address of your SIEM
system. Click Add .
Step 8
Click OK .
Step 9
Confirm that both SNMP agents are set to Automatic so they run upon server boot.
Starting the Domino
Server Add-in Tasks
Once you have set-up the SNMP services, you must start the Domino server
add-in tasks. Repeat the below procedure for each Domino partition.
To start the Domino server add-in tasks:
Step 1
Log in to the Domino Server console.
Step 2
To support SNMP traps for Domino events, start the Event Interceptor add-in task:
load intrcpt
Step 3
To support Domino statistic threshold traps, start the Statistic Collector add-in task:
load collect
Step 4
Arrange for the add-in tasks to be restarted automatically the next time that
Domino is restarted. Add intrcpt and collect to the ServerTasks variable in
Domino's NOTES.INI file.