Enterasys SecureStack C2, Руководство по настройке, Страница: 344 / 607

show port ratelimit
10-10 Port Priority and Rate Limiting Configuration
Commands
.
show port ratelimit
Use this command to show the traffic rate limiting configuration on one or more ports.
Syntax
show port ratelimit [ port-string ]
Parameters
Defaults
If port ‐ string is not specified, rate limiting information will be displayed for all ports.
Mode
Switch command, read ‐ only.
Example
This example shows how to display the current rate limiting information for
ge
.2.1:
C2(su)->show port ratelimit ge.2.1
Global Ratelimiting status is disabled.
Port Threshold Priority
Number Index (kB/s) Action Direction List Status
----------- ----- --------- ------------ --------- ----------- --------
ge.2.1 1 64 discard inbound 0 disabled
ge.2.1 2 64 discard inbound 0 disabled
ge.2.1 3 64 discard inbound 0 disabled
ge.2.1 4 64 discard inbound 0 disabled
ge.2.1 5 64 discard inbound 0 disabled
ge.2.1 6 64 discard inbound 0 disabled
ge.2.1 7 64 discard inbound 0 disabled
ge.2.1 8 64 discard inbound 0 disabled
Table 10 ‐ 1 provides an explanation of the command output.
For information about... Refer to page...
show port ratelimit 10-10
set port ratelimit 10-11
clear port ratelimit 10-12
port ‐ string (Optional) Displays rate limiting information for specific port(s). For a
detailed description of possible port ‐ string values, refer to “ Port String
Syntax Used in the CLI ” on page 5 ‐ 2.
Table 10-1 show port ratelimit Output Details
Output What It Displays...
Port Number Port designation. For a detailed description of possible port-string
values, refer to “ Port String Syntax Used in the CLI ” on page 5-2.