Enterasys SecureStack C2 C2G124-24, Руководство по установке оборудования

Страница: 26 / 78

Management
1-6 Introduction
Management
Management of the module can be either in ‐ band or out ‐ of ‐ band. In ‐ band remote
management is possible using Telnet, Enterasys Networks’ NetSight
®
management
application, or the WebView application. Out ‐ of ‐ band management is provided through
the RJ45 COM (Communication) port on the front panel using a VT100 terminal or a
VT100 terminal emulator.
Switch Configuration Using WebView
Enterasys Networks’ HTTP ‐ based Web management application (WebView) is an
intuitive web tool for simple management tasks.
Switch Configuration Using CLI Commands
The CLI commands enable you to perform more complete switch configuration
management tasks.
For CLI command set information and how to configure the module, refer to the
SecureStack C2 Configuration Guide .
Standards Compatibility
The switches are fully compliant with the IEEE 802.3 ‐ 2002, 802.3ae ‐ 2002, 802.1D ‐ 1998, and
802.1Q ‐ 1998 standards. The switches provide IEEE 802.1D ‐ 1998 Spanning Tree Algorithm
(STA) support to enhance the overall reliability of the network and protect against “loop”
conditions.
LANVIEW Diagnostic LEDs
LANVIEW diagnostic LEDs serve as an important troubleshooting aid by providing an
easy way to observe the status of individual ports and overall network operations.
MGBIC-08 Provides one 1000BASE-ELX compliant LC fiber-optic single-mode port with a
standard LC connector. For optical and operating range specifications, refer to
“
MGBIC-08 Specifications (1000BASE-ELX) ” on page A-7.
MGBIC-02 Provides one 1000BASE-T compliant copper port with an RJ45 connector. For
port specifications, refer to “
MGBIC-02 Specifications (1000BASE-T) ” on
page A-7.
Table 1-1 Description of Mini-GBICs (Continued)
Mini-GBIC Specification