PN 9033805-02
Page 1 of 2
GPIM-02 Reference Sheet
The GPIM-02 Gigabit Ethernet Port Interface Module is an RJ45 interface device that can be installed into an
Enterasys Networks device that supports Enterasys Networks Gigabit Ethernet Port Interface Modules.
Features and Specifications
•
1000BASE-T compliant, RJ45
•
Meets IEEE 802.3ab specifications
•
Hot pluggable
•
Auto-Negotiation supported according to IEEE 802.3 Clause 28
•
Drive distance 100 meters via Category 5 cabling
Installation
To install the GPIM-02, refer to the installation instructions for optional Gigabit Ethernet Interface Modules
described in the user’s guide for the host device.
Regulatory Compliance
This equipment meets the following safety and electromagnetic compatibility (EMC) requirements:
Note:
Check the documentation of your host device to see if it will support the GPIM-02.
In order for 2nd/3rd Generation SmartSwitch/Matrix products to recognize that a GPIM-02 is installed, the host device
should have one of the following firmware versions installed:
• For firmware in the 5.x track, version 5.05.05 or higher must be used.
• For firmware in the 4.x track, version 4.08.52 or higher must be used.
The GPIM-02 supports only 1000Mb/s; 10Mb/s and 100Mb/s speeds are not supported.
The Vertical Horizon series of products does not support the GPIM-02.
Safety:
UL 60950, CSA C22.2 No. 60950, 73/23/EEC, EN 60950, IEC 60950,
EN 60825, 21 CFR 1040.10
Electromagnetic Compatibility (EMC):
47 CFR Parts 2 and 15, CSA C108.8, 89/336/EEC, EN 55022, EN 61000-3-2,
EN 61000-3-3, EN 55024, AS/NZS CISPR 22, VCCI V-3
