Enterasys ENTERASYS ATX, Руководство пользователя, Страница: 12 / 82

Introduction
1-4 Software Conventions
Figure 1-1. Sample Window Showing Group Boxes
Device Name
Displays the user-defined name of the device. The device name can be changed
via the System Group window; see the Generic SNMP User’s Guide for details.
IP Address
Displays the ATX Switch’s IP (Internet Protocol) Address; this will be the IP
address used to define the ATX Switch icon. IP addresses are assigned via Local
Management for the ATX Switch; they cannot be changed via NetSight Element
Manager.
Location
Displays the user-defined location of the device. The location is entered through
the System Group window; see the Generic SNMP User’s Guide for details.
MAC Address
Displays the manufacturer-set MAC address of the channel through which
NetSight Element Manager is communicating with the ATX Switch. This address
is factory-set and cannot be altered.
Informational fields describing the boards and/or ports being modeled are also
displayed in most windows:
Port Number
Displays the number of the monitored port.
Uptime
Displays the amount of time, in a day(s) hh:mm:ss format, that the ATX Switch
has been running since the last start-up.
Using Window Buttons
The button that appears at the bottom of most windows allows you to
exit a window and terminate any unsaved changes you have made. You may also
have to use this button to close a window after you have made any necessary
changes and set them by clicking on an
, , or button.
An , , or button appears in windows that have
configurable values; it allows you to confirm and SET changes you have made to
those values. In some windows, you may have to use this button to confirm each
individual set; in other windows, you can set several values at once and confirm
the sets with one click on the button.
The button brings up a Help text box with information specific to the
current window. For more information concerning Help buttons, see Getting
Help,
page 1-5 .