Enterasys AP2650, Руководство по установке, Страница: 29 / 58

Mounting the Enterasys Wireless Outdoor AP with Mounting Plate
Enterasys Wireless Outdoor AP Installation Guide 2-11
Figure 2-12 Fitting the Enterasys Wireless Outdoor AP to a Mounting Plate
2. Fit the Enterasys Wireless Outdoor AP so that the upper edge of the rear of the housing is
below the two catches of the mounting plate (Position B in Figure 2 ‐ 12 ).
3. Push in the Enterasys Wireless Outdoor AP until it engages in the notches at the lower edge of
the mounting plate (Position C in Figure 2 ‐ 12 ).
4. Screw the Enterasys Wireless Outdoor AP using the three M4 screws supplied with the
mounting plate (Position C in Figure 2 ‐ 13 ), tightening torque 1.8 Nm.