Enterasys 7100G Series, Руководство по установке оборудования

Страница: 49 / 90

LEDs
Enterasys 7100G-Series Hardware Installation Guide 3-3
Table 3-2 describes the LED indications for the port status LED for the QSFP+ ports and provides
recommended actions.
Table 3-3 on page 3-3 describes the LED indications for the port status LED for the 1000 BASE-T
ports and provides recommended actions.
Figure 3-2 1000 BASE-T (RJ45) Port LEDS
Table 3-2 QSFP+ Port LEDs
Color State Recommended Action
None No link. No activity. Port enabled or disabled. If you know the port should
be active and is not, contact
Enterasys Technical Support.
Green (solid) Link present, port enabled, no traffic is being received
by the interface. None.
Yellow (blinking) Link present, port enabled, traffic is being received by
the interface. None.
1 Receive Port Status LED 2 Transmit Port Status LED
Table 3-3 BASE-T Port LEDs
Rx Color Tx Color State Recommended Action
None None No link. No activity. Port enabled or
disabled. If you know the port should
be active and is not, contact
Enterasys Technical Support.
Green (solid) Green (solid) Link present, port enabled, no traffic is
being received by the interface. None.
Amber
(blinking/solid) Green
(blinking) Link present, port enabled, traffic is being
received by the interface. None.
Amber (solid) A transmit fault or error condition exists Contact Enterasys Technical
Support if assistance is
required.