Quick Start User Guide
V2.0
DX
Digital Series
INTRODUCTION
The Entel DX4xx digital series is designed for those users who demand the
ultimate performance for their business critical communications.
Your radio can be configured for Digital or Analogue channels, or both and to
meet your exact requirements the radio may have been customised by your
Entel dealer. These features will be explained in a separate guide issued
by the dealer.
PACKING LIST
DX4xx
Digital Radio
CNB4xxE
Rechargeable Li-Ion battery
CBH450
Loaded belt clip
CATxxx
High efficiency antenna
CSAHX
Rapid charger
OPTIONAL ACCESSORIES
Attaching and removing accessories
1.
To attach an accessory, remove the accessory cover by unscrewing the
locking screw anti-clockwise (store in a
safe place).
2.
Plug the accessory into the socket,
then carefully tighten the locking screw
clockwise until finger tight (do not
overtighten or use any implement)
3.
To remove an accessory, unscrew the locking
screw of the accessory by hand in an anti-
clockwise direction. Ensure you re-fit the
accessory socket cover so as to protect the
socket.
BATTERY INFORMATION
Battery charging
1.
Connect the AC adapter to the charger pod and plug in.
2.
Turn the radio off.
3.
Insert the battery pack into the charger pod, either with or without the
radio attached. The charger LED status light changes to red and charging
begins.
4.
When charging is complete the charger status LED changes from red to
green, a fully discharged battery pack will take approximately 2 hours
(CNB420E), 3 hours (CNB450E) to re-charge.
A flashing red LED on the charger indicates there is a problem with the
battery. Remove the battery from the charger and consult your Entel Dealer.
CAUTION
BATTERY PACK PRECAUTIONS
•
Do not recharge the battery pack if it is already fully charged. Doing so
may reduce the life of the battery pack.
•
After charging is complete, remove the battery from the charger. If the
power to the charger is turned off and on again, charging will restart and
the battery will become overcharged.
•
Please ensure the radio is turned off before placing it in the charger and
never switch a radio on whilst in the charger.
•
Only use Entel branded battery packs and chargers.
•
Do not short the battery terminals or dispose of the battery in a fire.
•
Do not charge the radio and/or battery pack if they are wet.
DANGER
DO NOT DISASSEMBLE OR MODIFY THE BATTERY IN ANY WAY!
Your Entel battery pack incorporates a safety circuit to avoid danger, if the
safety circuit is damaged or bypassed, or the battery cells are damaged
directly, they may generate extreme heat, smoke, rupture and emit flames.
CONTROLS & INDICATORS
1.
On/Off/Volume control. Rotate clockwise to turn on and increase volume.
Rotate anti-clockwise to reduce volume & turn off.
2.
Channel Control
3.
Accessory socket
4.
Push To Talk (PTT) button, press to speak and release to listen
5.
Dealer programmable buttons (ask your dealer for more information)
6.
LED indicator
Red Steady
- Transmitting
Red Double Flash
- Low Battery
Red Fast Flash
–
Error
Green Steady
– Receiving
Green Steady (AM)
– Monitoring Channel
Green slow flash (DM)
– Digital call hang time
Amber steady
– Receiving invalid signal
Amber Flash every 5-seconds
– Radio in standby
Amber Rapid Flash
– Scanning
7.
Info button
8.
Full keypad (20 Keys)
9.
Navigation key
10.
Microphone
5
2
3
4
5
NON DISPLAY
9
2
1
5
3
7
5
6
NAV KEY
3
2
5
5
4
10
Talk Here
20 KEY LCD
10
Talk Here
8
6
1
4
7
10
Talk Here
1
6