background image

OEX-6sr  Operation  Manual

What is the OEX-6sr Output Expander?

The  OEX6sr is a multi-function digital device that adds six

individual outputs, or three additional pairs of stereo outputs to an

ASR- 10, ASR-88, or EPS- 16 PLUS keyboard, enhancing the
capabilities and flexibility of the  ASR/EPS-16  PLUS.

The power of the  OEX-6sr  Output Expander lies in its unique
configuration: six individual outputs or three stereo pairs (AUX 1,
AUX 2, AUX 3). The addition of these outputs allows you to
route separate signals for independent processing, or isolate parts
for click or monitoring references. Even individual  WaveSamples
within an instrument (for instance, the snare and kick drum from a
drum kit) can be sent to different outputs for discrete external
effects processing (such as with the ENSONIQ  DP/4+  Parallel
Effects Processor). The design of this product resulted from
customer requests for a multi-purpose output device that could be
configured with stereo outputs  and/or  individual outputs. As with
any product, getting to know its operation will help to increase
your productivity and enhance the performance and expression of
your music.

IMPORTANT! Because the  OEX-6sr  is a digital device, no audio
signal passes through the connector cable from the  ASR/EPS-16
PLUS to the OEX-6sr. Do not connect this cable to any other
device that uses a similar connector (such as a Macintosh), as
this will damage both units and void their warranties.

Important points about the OEX-6sr

Never connect the OEX-6sr while the power to the

ASIUEPS-16 PLUS is on. This will damage both units
and void their warranties.

The signals sent to AUX 1, AUX 2, and AUX 3 on the

OEX-6sr are dry; these outputs do not pass signals with
effects. The wet signal is only present at the Main
Audio Outputs.

The AUX 1, AUX 2, and AUX 3 outputs on the  OEX-

6sr are always active when the  OEX-6sr is connected;
see the signal flow diagram.

The Outputs on the OEX-6sr are not affected by the

ASR/EPS-

 16 PLUS master Volume Slider.

Assigning of sounds to the  OEX-6sr can be handled two

I

Содержание OEX-6sr






















Отзывы: