BrightEye Mitto Family - Page 54
Mitto Family of Scan Converters User Guide
Mixer Menu
Mitto has a four-channel audio mixer with four inputs and four outputs. It allows you to adjust the
level of each channel independently. Any audio input can be assigned to any audio output.
For example, you could route Input Channel 1 to Output Channel 1, Input Channel 2 to Output
Channel 2, Input Channel 3 to Output Channel 3, and Input Channel 4 to Output Channel 4.
Another configuration example would be to turn off Input Channels 3 and 4 by de-selecting the
Output Channel assignments, meaning that no Output Channels are selected for Input Channel 3 or
Input Channel 4. Then route Input Channel 1 to Output Channel 1 and Output Channel 3, and Input
Channel 2 to Output Channel 2 and Output Channel 3. Now Channels 1 and 2 will have the same
original stereo content, and the Channel 3 will output a mono mix-down.
You can bring in up to two channels of analog audio through the Analog/Digital Audio Input. These
channels are routed to Input Channels 1 and 2 in the Mixer Menu.
You can bring in up to two streams of AES audio (four channels) through the Analog/Digital Audio
Input. Stream 1 routes to Input Channels 1 and 2 in the Mixer Menu. Stream 2 routes to Input
Channels 3 and 4.
Set the amount of headroom that you wish to reserve before the peak indicator illuminates. This level
is set in the Config Menu.
Mitto Mixer Menu
