BrightEye 81-F - Page 4
81-F
3G/HD/SD Optical SDI to HDMI Converter
Product Overview
Use BrightEye 81-F to
convert optical 3G, HD or SD video feeds to HDMI and electrical SDI.
Convenient
for feeding a video monitor, BrightEye 81-F provides a reliable way to achieve confidence monitoring
in post and broadcast applications.
BrightEye 81-F is an optical to HDMI and electrical converter for use with 3 Gb/s and 1.5 Gb/s high
definition video signals, and standard definition signals. The video input is received on an optical
LC connector, converted, and then output on both a BNC connector and an HDMI connector. The
HDMI output is not HDCP encrypted.
For facilities using 3G, the issue of monitoring the signal becomes a challenge. A 3G video signal can
be easily viewed via the HDMI output of BrightEye 81-F.
Signal monitoring and control is provided through the included BrightEye Mac
or PC software
.
Note: A glossary of commonly used video terms is provided at the end of this user guide.
Capabilities Overview for BrightEye 81-F
• Optical to HDMI Converter
• Optical to Electrical Converter
• Use with Video Monitors that have HDMI Input
• Use with HD or SD Signals
• 3G HD, Level A Supported
• Optical Receiver
• Passes Embedded Audio
Free Software Upgrades for the Life of the Product
BrightEye Mac or PC software is included with each unit at no charge. Use BrightEye Mac or PC
software to monitor and control a single BrightEye unit or any number of units connected to a USB
hub. BrightEye Mac or PC software is not required as the BrightEye 81-F front panel indicators provide
signal monitoring. You can choose what type of monitoring and control is best for your facility.
BrightEye software is easily upgraded through the unit’s USB port. Software upgrades are available at
no charge for the life of the product and are conveniently downloadable at the following link:
www.ensembledesigns.com/support/brighteye-support/brighteye-software
