enraf SmartRadar FlexLine, Руководство по установке

Страница: 37 / 40

FlexLine Installation
34
Stand-alone SmartView display
The labelling on the wiring terminal in the SmartView is identical to the labelling in
the SmartRadar.
/i
/i
4.12 Finishing installation with SmartConn
1. Replace the cover on the SmartConn.
2. Tighten the 4 bolts of the cover. Use an Allen key (4 mm).
3. The installation is now completed.
Cable specifications
Type 4-wire, shielded
Maximum length 50 meter
Label Parameters
26. SGND [Ex ia] IIB
U
o
= 14,2 V
I
o
= 522 mA
P
o
= 1,7W
C
o
=2,18 µF
L
o
= 0,25 mH
27.
28. Safe_A
29. Safe_B
Warning!
Check if the separation between intrinsic and non intrinsic cabling is
sufficient and complies with any local and/or national regulations.