Page 3
© 2021 Enphase Energy. All rights reserved. Enphase, the Enphase logo, IQ8 microinverters,
and other names are trademarks of Enphase Energy, Inc. Data subject to change.
ZRT-UM-0001-01-EN-US-2021-12-29
Stick Velcro on wall
at equipment location
Attach Range Test node
on wall
USB Adapter, power bank, and Velcro:
Here are the links and quantities needed for two nodes:
: Quantity - 1 (there are two adapters in the package)
: Quantity – 2
: Quantity – 1 sheet
Range Test node assembly:
Charge the power bank overnight in case it has low charge. Insert the USB C to USB 3
adapter in the USB C power port of the power bank. Insert the Zigbee dongle at the other
end of the USB adapter. The blue light in the Zigbee dongle should light up and stay “ON”.
Attach Velcro hook to the rear side of the power bank.
Section II: Preparing for Range Test
At the site, determine the best location for IQ Gateway (either standalone or inside IQ
combiner), IQ System Controller, and IQ Batteries. For good RF quality without range
extension, it is recommended that all equipment be installed 40 feet within line
of sight.
At the selected locations for equipment, stick a Velcro loop on the wall as shown in the
figure below. Range Test node can be attached to the Velcro loop. Please ensure that the
Velcro loop is not attached on the surface of an existing metal enclosure as presence of a
metal backplane can affect the Range Test results.
