11
IQ System Controller 2 Quick Install Guide
6
Step 2
Installing the mounting plate
Installing the mounting bracket and mount the IQ System Controller 2
as per instructions below. Please note the following before installing
1. The IQ System Controller 2 smart switch weighs 39.4 kg (87 lbs)
and will require two persons to lift the unit.
2. Risk of injury and equipment damage. Avoid dropping the IQ
System Controller 2. Doing so may create a hazard, cause
serious injury, and/or damage the equipment.
Provided in Accessory Kit
2
1
4
3
5
3. Risk of injury and equipment damage. Do not release the
IQ System Controller 2 until you ensure that the IQ System
Controller 2 is fully seated in the wall-mount bracket shelf.
4.
Three #10, 1/4”, or 5/16” lag bolts or screws, 7.6cm (three
inches) long (depending on attachment wall), for each
wall-mount bracket.
5. Check with a structural engineer and local standards for local
requirements. Washers to be used between fastener heads and
wall-mount bracket.
Section A - Mounting the product