Chapter 2 INSTALLATION
d.
Reset Switch Lead (J2, Pin 18-20, RESET)
This 2-pin connector connects to the case-mounted reset
switch for rebooting your computer without having to turn
off your power switch. This is a preferred method of
rebooting in order to prolong the life of the system’s power
supply.
e.
Turbo LED (J2, Pin 6-8)
The motherboard's
turbo
mode is always on, so an LED
attached to this connector will always be lit while system
power is on. You may wish to connect the Power LED of
your system case to this connector.
EP-PT22 User’s Manual
19
1
J2, Pin18-20:
Reset Switch Lead
1
J2, Pin 6-8 : Turbo LED
+ -
