ENPC EP-KL11, Руководство пользователя

Страница: 28 / 36

21
2
Chapter 2 INSTALLATION
e. ATX Power Switch Lead
( J1, Pin 10, 12)
The system power is controlled by a push-switch, connected
to this lead. Pushing the button once will turn on the power
and pushing again will turn off the power. The system power
LED shows that status of the system’s power. This
connection does not have a function when a standard power
supply is used.
NOTE: If the power to the ATX power supply is interrupted
while the motherboard is on, standby power will
remember that the motherboard should be on and boot
the computer when power is reapplied to the ATX
power supply.
EP-KL11 User’s Manual
1
J1, Pin 10, 12:
ATX Power Switch On/ Off
Lead