17
6 Connecting Load Cell
The force indicator can be connected to the other load cells. Connecting to a plug and setup may be needed when using
the load cell not from
us.
6.1 Connection
Welding the cable of
load cell with the plug.
The Force Indictor can
identify the capacity
of load cell which
have a identified resistor, the capacity
setup is not needed.
6.2 Capacity Setup
If there is no identified resistor, the capacity setup is needed.
Enter Menu-System-Capacity.
Select the capacity. Touch
to confirm the setting.
Pin#
Description
1
Power +
2
3
Output -
4
Power -(Gnd)
5,6
Resistor
Table 6-1 Connector
Capacity
(kN)
Resistance
R
I
(k
Ω
)
1
2
2
3.3
5
5.1
10
7.5
20
10
50
15
100
22
200
33
Table 6-2 Resistance
Fig.6-1
Fig. 6-2
