I.
I. TTL Loupe Systems
– Safety and Care
Instructions
Please read the instruction manual carefully before using your
Enova Loupes, light, or battery. Damages due to disregard of the
instructions within this manual are not covered under the warranty
policy of Enova Illumination.
1.1 Notes on Safety
-
Improper use of oculars may result in damage or failure of glue,
resulting in loose or unattached ocular.
-
Do NOT look directly into the sun or other intense light while
wearing loupes to avoid eye damage.
-
Avoid vibration or shaking of loupes. This may result in loose or
unattached pieces.
-
Proper use of the Loupe and Light systems requires parts from
Enova or licensed suppliers only.
1.2 Proper Usage
-
Enova Loupes are designed for use in medical, dental, or
veterinary settings only. Enova Loupes are intended only to
enlarge your field of view during clinical or other medical
procedures.
1.3 Notes on Care
Proper care and usage of the products ensure their lifespan. Misuse,
disregard for instructions, or improper care may result in breakage or
deterioration of your Enova products.
-
Handle loupes with care, and store in dust-free environment.
-
Loupes are water and dust resistant but avoid prolonged contact
with water or submersion. Store in a dry place when not in use.
-
Clean oculars and lenses with soap and water or Enova
approved cleaning products
only
and wipe with dry microfiber
cloth.
-
Note: Use moistened cloth to clean. Do not spray disinfectant
directly onto lenses or oculars to avoid over-spray.
-
Note: Avoid cleaners with alcohol on plastic frames. Can be
used on metal frames. Aggressive cleaners could damage
lenses.
4.8 Functional Overview of
Activ™ Neck Battery and Charger
1.
Activ™ neck battery
2. Touch sensor power button
3. Charging port
4. Power Pack mobile charger port
5. Mobile charger power output
4.9 Using the
Activ™ Neck Battery
The Battery may not be fully charged when it arrives. We highly
recommend charging your
Activ™ Neck Battery fully before first use.
-
For mobile charger:
plug the mobile charger into wall outlet. Then,
take the power output (4) and plug into the
Activ™ Neck Battery (at
the input (3) on the bottom.)
LED Indicator shows status of charge.
-
The LED will be illuminated solid green when battery is fully
charged.
-
As battery life decreases, the LED will go through the following
sequence:
1. Flashes red when charging
2. Solid green when fully charged
3. Blinks red to indicate low battery. Light itself will also flash.
When light flashes, approximately 5 minutes of life left.
PP 1.5 Battery Pack: If the plus or minus capacitive touch buttons are
pressed, the LEDs will switch to show the brightness level. There are twelve
levels of brightness, but as you press plus or minus, the LED indicators will
go from FIVE green to ONE green to represent full brightness and lowest
brightness, respectively. For use only with clip-on loupe lights.
1
6
