The machine does not start
Check that the machine is powered by the correct
tension. Do not use extension leads with an
insufficient section which could cause drops in
tension.
Check any safety devices of the electric system
Ensure that the impeller is not blocked and clean
it.
Replace the condenser.
•
Place the machine in a dry environment, away from weather conditions and protected
against humidity.
•
Do not use the machine to pump inflammable liquids, explosives or in an inflammable
atmosphere as the motor is not explosion-proof.
•
The temperature of liquids to be pumped must be between +5°C and 35°C; higher
temperatures would cause the overall impeller performance to worsen.
•
The noise level detected is within the limits set by directive 2006/42 EEC (<85Db)
•
Before starting the machine make sure it has not undergone any damage during
transportation (breakages or denting) that could affect its operation.
•
Never plug in the machine, operate the controls or perform any operation on electrical parts
with wet hands.
•
Never remove the motor protection casing while the machine is in operation and during
cleaning.
•
Read every part of this manual carefully before using the machine and keep it for future
reference.
•
Enoitalia S.r.l. is not responsible for damage caused by changes made to the machine by
third parties.
•
Enoitalia S.r.l. reserves the right to make construction changes at any time without being
obliged to communicate that such changes are being made.
Enoitalia S.r.l.
Via Provinciale Pisana, 162 Fraz. Pieve a Ripoli
50050 Cerreto Guidi- (FI)
Tel: +39 0571588031 Fax:+39 0571588080
www.enoitalia.net
5. WARNING