© 2020 EnOcean | www.enocean.com
PTM 210 / PTM 215 / PTM 215U / PTM 215J User Manual May 2020 | Page 32/37
USER MANUAL
PTM 210 / PTM 215 / PTM 215U / PTM 215J
DC Step code and later
6
APPLICATIONS INFORMATION
6.1
Product Label & QR Code
LABELS
6.2
Construction of application specific Switch Rockers
For CAD system development support, 3D construction data is available from EnOcean (IGS
data). Using this data, the mechanical interface is fixed, and the shape and surface of the
rocker(s) can be changed according to requirements.
Polycarbonate is recommended as rocker material since it is both buckling resistant and
wear-proof. It is also recommended to apply Teflon varnish in the areas of actuation.
It is recommended using non-conductive material for the rockers to ensure best
transmission range. Avoid if possible metallic materials or plastics with conduct-
ing ingredients such as graphite.
If the rocker is not mounted on the rotation axis of PTM 21x several tolerances
have to be considered! The measure from support plane to top of the energy bow
is 7.70 mm +/- 0.3 mm!
The movement of the energy bow must not be limited by mounted rockers!
Catwalks of the switch rocker must not exert continuous forces on contact nip-
ples!
6.3
Device Mounting
For mounting the PTM 21x device into an application specific case, the package outline
drawings of the device are given in chapter 1.5. More detailed 3D construction data is avail-
able from EnOcean in IGS format.
