![EnOcean EASYFIT EMSI Скачать руководство пользователя страница 66](http://html1.mh-extra.com/html/enocean/easyfit-emsi/easyfit-emsi_user-manual_2413683066.webp)
USER MANUAL
STM 550 / EMSI
–
ENOCEAN MULTISENSOR FOR IOT APPLICATIONS
© 2020 EnOcean | www.enocean.com F-710-017, V1.0
STM 550 / EMSI User Manual | v1.3 | September 2020 | Page 66/97
9.5.18
SOLAR_TX_INTERVAL
If solar cell illumination-controlled reporting has been enabled and the solar cell illumina-
tion is above the defined threshold then the resulting reporting interval will be determined
by the register SOLAR_TX_INTERVAL shown in Figure 45 below.
SOLAR_TX_INTERVAL
Bit 15
Bit 14
…
Bit 1
Bit 0
SOLAR CELL INTERVAL
Figure 45
–
SOLAR_TX_INTERVAL register
The encoding used by the SOLAR CELL INTERVAL bit field is shown in Table 30 below.
SOLAR CELL INTERVAL Solar cell illumination-based reporting interval
0x0000, 0x0001, 0x0002
Not supported (Do not use)
0x0003
3 seconds (minimum setting)
…
…
0x003C (Default)
60 seconds (default setting)
…
…
0xFFFF
65535 seconds (maximum setting)
Table 30
–
SOLAR CELL INTERVAL bit field encoding
The default reporting interval while solar cell illumination is above the solar cell illumination
threshold is 60 seconds. This can be reduced according to user requirements keeping in
mind the energy balance.