![EnOcean EASYFIT EMSI Скачать руководство пользователя страница 58](http://html1.mh-extra.com/html/enocean/easyfit-emsi/easyfit-emsi_user-manual_2413683058.webp)
USER MANUAL
STM 550 / EMSI
–
ENOCEAN MULTISENSOR FOR IOT APPLICATIONS
© 2020 EnOcean | www.enocean.com F-710-017, V1.0
STM 550 / EMSI User Manual | v1.3 | September 2020 | Page 58/97
9.5.11
FUNCTIONAL_MODE
The FUNCTIONAL_MODE register can be used to switch between the different functional
modes of STM 550 as described in chapter 2.2.
Figure 38 below shows the structure of the FUNCTIONAL_MODE register.
FUNCTIONAL_MODE (Default: 0x00, OOB: 0x01)
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
RFU
MODE
Figure 38
–
FUNCTIONAL_MODE register
The encoding used by the MODE bit field is shown in Table 17 below.
MODE
Functional Mode
0b0000 (Default)
Standard Operation Mode
0b0001
Standby (Sleep) Mode
0b0010
Learn Mode
0b0011
Function Test Mode
0b0100
Illumination Test Mode
0b0101
Acceleration Test Mode
0b0111
Factory Reset
Others
Reserved (Do not use)
Table 17
–
MODE bit field encoding
Note that the default configuration (after factory reset) is standard operation mode while
the out of box configuration (for new devices) is standby (sleep) mode.