USER MANUAL
STM 550 / EMSI
–
ENOCEAN MULTISENSOR FOR IOT APPLICATIONS
© 2020 EnOcean | www.enocean.com F-710-017, V1.0
STM 550 / EMSI User Manual | v1.3 | September 2020 | Page 15/97
2.3.2
Standard reporting interval
The standard reporting interval determines the default interval between two status updates
of STM 550.
The standard reporting interval can be adjusted using the STANDARD_TX_INTERVAL NFC
register as described in chapter 9.5.12. Consider the available energy before lowering the
reporting interval as discussed in chapter 2.3.1.
The default setting for the standard reporting interval is one status update once every 60
seconds (1 minute).
Figure 2 below illustrates the use of the standard reporting interval.
STANDARD_TX_INTERVAL
STANDARD_TX_INTERVAL
Figure 2
–
Standard reporting interval
STM 550 can be configured to use a lower reporting interval, i.e. provide updates more often,
based on certain conditions as described below.