USER MANUAL
EMDCB
–
BLUETOOTH LOW ENERGY MOTION AND ILLUMINATION SENSOR
© 2019 EnOcean | www.enocean.com
EMDCB User Manual | v1.3 | August 2019 | Page 11/67
2.3.2
Internal product interface
EMDCB contains a holder for a CR2032 battery and a PIR sensitivity selection switch as
shown in Figure 3 below.
Figure 3
–
EMDCB internal view
The internal product interface is accessible after removing the wall mount plate. If EMDCB
has not yet been mounted onto the ceiling then the wall mount plate can be removed by
using a screw driver (or similar) with the opening slot. If the EMDCB wall mount plate is
already attached to the ceiling, then EMDCB can be removed by gently pulling the housing.