EISKA – EnOcean IoT Starter Kit 868 MHz
Installation Guide
© 2020 EnOcean | www.enocean.com
EISKA Installation Guide | October 2020 | Page 1/2
Product Description
The IoT starter kit EISKA offers a smart solution for
evaluation of EnOcean wireless sensors. Simply plug
the USB stick into a Windows PC to directly receive
and visualize sensor data or connect the stick to a
Wifi access point (e.g. Aruba) to enable smart IoT
cloud services.
The kit includes following components:
USB 300: USB Stick EnOcean Radio Receiver
EMSIA: Solar Powered Multisensor (temperature, humidity,
illumination and acceleration sensor)
EWSDA: Self-powered Push Button Switch
Instructions
Direct visualization via Windows PC
Plug USB 300 into USB port of PC or notebook
Download and install DolphinView:
https://www.enocean.com/en/support/download/
Start DolphinView and press connect button (F5)
Push EWSDA switch on any side and you will see received telegram.
Interpretation: select node on left side and chose profile (e.g. F6-03-01)
Push EMSIA learn button to start device and to send learn telegram
Interpretation: device profile will be automatically recognized
For details see product documentation of EMSIA & EWSDA (PTM 215)
Setup IoT Demo
Plug USB 300 into USB port of Wifi access point
Download IoT demo documentation e.g. for Aruba IoT demo
https://www.enocean.com/en/products/enocean_modules/eiska/
Follow instructions of IoT demo documentation
Additional Information
USB 300:
https://www.enocean.com/en/products/enocean_modules/usb-300-oem/
EMSIA:
https://www.enocean.com/en/products/enocean_modules/iot-multisensor-emsia-oem
/
EWSDA:
https://www.enocean.com/en/products/enocean_modules/ptm-210ptm-215/
Ordering information
Product
Frequency
Finished Product
EISKA
868.300 MHz
E3004-X550
