![EnOcean B6221-K516 Скачать руководство пользователя страница 57](http://html1.mh-extra.com/html/enocean/b6221-k516/b6221-k516_user-manual_2413678057.webp)
USER MANUAL
STM 550B / EMSIB - EASYFIT MULTISENSOR FOR IOT APPLICATIONS (2.4 GHZ BLE)
© 2020 EnOcean | www.enocean.com
F-710-017, V1.0
STM 550B / EMSIB User Manual | v1.3 | June 2020 | Page 57 / 115
9.2
NDEF
The NDEF area contains a device identification string using the NDEF (NFC Data Exchange
Format) standard that is readable by most NFC-capable reader devices (including
smartphones).
An example device identification string from the NDEF area of STM 550B would be:
30SE5000Z4BBE99C695FB5AB91DB8499E930PS6221-K516+3C20
This NDEF string encodes the parameters shown in Table 11 below.
Identi-
fier
Length of data (excl. identifier) Value
30S
12 characters
Static Source Address (6 byte, variable)
Z
32 characters
Security Key (16 byte, variable)
30P
10 characters
Ordering Code (S6221-K516)
2P
4 characters
Step Code and Revision (CA03)
3C
2 characters
Header Start Address (0x20)
Table 11
–
NDEF Parameters
Note that the security key is only available if the Security Key Access in the Security Con-
figuration register is set to 0b00 (Public Access) as described in chapter 9.5.13. Otherwise
the security key will be listed as all zeros.
9.3
SW_VERSION
The SW_VERSION register contains information about the version of the STM 550B module
firmware.
The SW_VERSION register is organized as a sequence of 4 byte in the following order:
◼
Major revision (Byte 0)
◼
Minor revision (Byte 1)
◼
Major sub-revision (Byte 2)
◼
Minor sub-revision (Byte 3)
If the value in SW_VERSION would be
0x01020304
then the corresponding SW version would
be 1.2.3.4.