Figure G-1: Connect panels, inner
lock system
1.
Lift the panel with the male locks a few inches.
2.
Push it against the opposite panel; make sure to
apply pressure around the top and bottom
corners.
3.
Slide the panel down to lock it in place. Make sure
all the locks are connected (top and bottom).
4.
Inspect the panels and make sure they are leveled
(the panel’s top is flat and matching).
Figure G-2: Inner-Locking System
Latch System:
The Latch Locking System is two brackets that lock together by passing the main loop over the
opposite side and locking latch (Figure G-3).
Figure G-3: Latch Locking System
5
