Enlight EN-7180 Series, Руководство пользователя, Страница: 4 / 7

A. Orient top cover and spread sides.
Slide vertically down and make
sure slide fastener guides are
properly set in the rails (Fig11).
once top cover is set properly on the
rails, slide away from you to close the
top Cover.
B. Use Hex Head screws to fasten top
Cover.
Line up snaps with holes on chassis
and snap into place starting with top
snaps.
Fig:11
A. Identify if M/B is ATX or microATX.
B.
Remove center bar to allow easy access to
electronic bay (Fig 8).
C. Make sure punch out holes for I/O ports on
the I/O plate are punched out matching
ports on the M/B.
D. Install at an angle, first by lining up the I/O
Ports on the M/B with I/O plate (Fig 9).
E.
Once holes are lined up, set M/B on
standoffs, make sure the M/B is seated
properly and fasten M/B using hex head
screws.
(M/B mounting screw holes will vary with
manufacturer. Please refer to M/B user
manual for more details.)
F. Connect wires as directed in M/B user
manual.
G. Reinstall center bar.
Fig:10
Fig:9
Fig:8
Slide in to P/S area and fasten with hex
head screws (Fig 10). Connect wires as
directed in M/B manual.