EN
53
To mount the soundbar on a wall, proceed as follows:
There must be at least 10 cm clearance
between your television and the mounted
soundbar
(see Fig. A
).
Mark the two drill holes required
horizontally at the desired mounting
point (
see Fig. A, step 1
).
The distance between the two wall
mounts is 406.7 mm (
see Fig. C
).
Drill the holes (
see Fig A, step 2
). To
do so, use an appropriate drill bit for
the respective surface (dia. 5.5–6 mm,
depending on the wall construction).
Fig. A
Loosen the four pre-installed screws on the wall mounting points on the back of the
soundbar (
see Fig. B, step 3
).
Next, use the previously loosened screws to attach both wall mounts supplied to
the soundbar as shown (
see Fig. B, step 4/5
).
Fig. B
Insert a wall plug into each drill
hole and screw both wall mounting
screws supplied into the wall
(
see Fig. C, step 6
).
Leave the screws protruding from
the wall a little so that you can then
mount the soundbar wall mounts
(
see Fig. D, step 7
).
Fig. C
44045 ML Eurospin 5006 7725 Content RC3.indb 53
44045 ML Eurospin 5006 7725 Content RC3.indb 53
30.04.2021 13:52:19
30.04.2021 13:52:19
