ENKHO 154703.01, Оригинальное руководство пользователя

Страница: 18 / 49

EN
18
2. Introduction
The operating instructions are part of the
product and contain important information
on safety, use and disposal. It is essential that
you read the instructions before assembling,
operation and maintaining the product. Before
using the product, please familiarize yourself
with all operating and safety instructions. Use
the product only as described and for the range
of applications specified. Please also pass these
operating instructions on to any future owner.
Intended Use
This appliance is suitable for straight and
curved cutting as well as mitre cuts of up to
45º on angular workpieces made of plastic,
wood or light metal. The appliance is exclusively
intended for domestic use in dry indoor spaces.
Observe the guideline on saw blade types. Any
other usage of or modifications to the appliance
are deemed to be improper and may result in a
significant risk of accidents or physical injury.
The appliance is not suitable for commercial
use.
The appliance is designed for use by adults. The
manufacturer is not liable for damages caused
by unspecified use or incorrect operation.
Any other use that is not explicitly approved in
these instructions may result in damage to the
device and represent a serious danger to the
user.
Features (Fig. A)
1. Stroke rate adjusting wheel
2. ON/OFF switch
3. Dust extraction connection
4. Dust blow-off/suction selector
5. Pendulum stroke switch
6. Base plate with removable sliding block
7. Protective pin
8. Rip fence
9. Saw blade set
10. Adaptor for dust extraction
11. Anti-dust guard
12. Guard roller
13. Quick-release chuck
14. Base plate lock
15. Locking screws for rip fence
16. Protective guard
17. Laser / LED lamp
18. Button for laser / LED lamp
19. ON/OFF Switch lock button
20. Fastening clips
21. Sliding block
22. Handle
Scope of delivery
1 x Jig Saw
1x Rip fence
3x saw blade HCS wood
1x saw blade HSS metal
1x Adapter for dust extraction
1x anti-dust guard
1x instruction manual
Technical data
Rated voltage 230V~; 50Hz
Rated power 850W
Rated no-load
stroke rate/ n
o
:
0-3000/min
Cutting capacity Wood 90mm
Metal 8mm
Plastic 10mm
Pendulum stroke 3 stages and fine-cut
setting
Cutting angle 0º / 15º / 30º / 45º
Weight 2.55kg
Degree of
Protection IPX0
Protection class II/
Noise emission value according to EN 62841-
2-11
Sound pressure
level L
PA
88dB
Sound power level
L
WA
99dB
Uncertainty K 5dB
Vibration emission value according to EN
62841-2-11
Cutting board, a
h,B
9.5m/s
2
Cutting sheet
metal, a
h,M
11.2m/s
2
Uncertainty K 1.5 m/s
2