7
BOIL-DRY PROTECTION
CLEANING AND CARE
•
CAUTION! Always remove the power plug from the power socket before cleaning! There is a
risk of an electric shock.
•
Do not submerse the appliance in water or other liquids!
•
Keep all power connectors and sockets dry.
•
Do not use harsh or abrasive cleaning agents or solvents.
•
Clean the appliance until it is cool after use.
1.
Open the lid by pressing the release button.
2.
Wipe kettle with a soft damp cloth.
3.
Clean the base with damp cloth.
A safety thermostat will automatically turn the kettle off (
O
) whenever the kettle is without
sufficient water, the kettle has auto shut off if boil dry. To reset the boil-dry protection device,
remove the kettle from the power base and allow it to cool before refilling with water.
Remove stains with a soft damp cloth. Rinse thoroughly.
Descaling:
Note: Mineral deposits can form a scale coating inside the kettle and may cause an off flavor in the
water or lengthen the boiling time. Suggest to clean your kettle regularly.
Use non-toxic descaler suitable for ceramic products.
Note: Do not use any harsh or abrasive cleaning agents or solvents.
Note: Once water has boiled, kettle switch off automatically.
Warning: Make sure on (
I
)/off (
O
) switch is in the “
O
” position (off) when not in use.
Clean outside:
Clean inside:
Purple
< 45 °C
45-60°C
60-75°C
75-90°C
>90°C
Blue
Green
Yellow Green
Red
As an alternative, use the white vinegar cleaning method:
•
In a spouted bowl, prepare a descaling solution of 3 cups white vinegar and 2 cups cool, clean
water; pour into kettle. Do not boil the solution, as it may damage the kettle.
•
Allow the solution to soak in the kettle overnight.
•
Discard the cleaning solution. Fill the kettle with cool, clean water; boil, discard, and rinse
thoroughly.
•
Repeat this procedure several times until the vinegar odor is gone.
8.
Check the water boiling status according to the status indicator.
9.
When water temperature reach your desired status, manually switch off by lift the on (
I
)/off
(
O
) switch to
O
.
10.
Hold the handle and lift up kettle to pour water through the spout slowly.
11.
Place kettle back onto the power base after use.
12.
Disconnect power plug from power socket when not in use.
13.
Empty the kettle after each use.