5
6
PRE-RIDE CHECKLIST
◆
LOOSE PARTS
Check and secure all fasteners before every ride. Make sure the
collar clamp, quick release lever, and handlebar spring sleeves are
locked properly in place before riding.
Please note: self- locking nuts and other self- locking fixings may lose
their effectiveness after being used several times and may need
replacing.
◆
REPLACEMENT PARTS
Replace worn or broken parts immediately.
Visi www.enjoybot.com
t
◆
Safety Gear
Always wear proper protective equipment, such as an approved
safety helmet, elbow pads and kneepads. Always wear shoes (lace-
up with rubber soles) and keep shoelaces tied and out of the way of
the wheels. Never ride barefooted or in sandals.
◆
BE CAREFUL!
You will see people on TV and maybe even people you know doing
tricks and stunts. These are people who have been practicing on
scooters for a very long time. Don’t try something until you are
ready. Avoid steep inclines and don’t ride too fast — you can lose
control and fall. Skateboard parks are not designed for
scooters.Never ride in traffic or on the street and watch your
surroundings for pedestrians, bikers, boarders and skaters.
Maintain a hold on the handlebars at all times.
◆
HOW TO RIDE
Place one foot on the baseboard, push forward with the other foot.
Steer with both hands on the handlebars.
For enhanced cornering, lean slightly into the direction of the turn.
For controlled stops, apply the brake by stepping on the rear brake.
Aest recommends that you practice applying the brake at various
speeds and in an open area free from obstructions before riding
your scooter around others.
USAGE
REPAIR AND MAINTENANCE
WARNING: Keep fingers
clear of the pivoting mechanism
when folding or unfolding the
scooter.
◆
CLEANING YOUR SCOOTER
Wipe with a damp cloth to remove dirt and dust. Do not use industrial cleaners or solvents as they may
damage the surfaces. Do not use alcohol, alcohol- based or ammonia- based cleaners as they may
damage or dissolve the plastic components or soften the decals or decal adhesive.
◆
WHEELS AND BEARINGS
Under normal circumstances and conditions, Aest wheels and wheel bearings are maintenance free.
Nonetheless, it is the responsibility of the owner or guardian to periodically inspect the wheels for wear
and tear, the axle for proper tightness, and bearings for side- to- side play, and loose parts. When a wheel
or wheel bearing develops play, this is an indication of excess wear and replacement is necessary.
Replace immediately with only genuine Aest wheels. Worn wheels/bearings are considered normal wear-
and- tear and are not covered by the Aest Warranty. Wheels other than genuine Aest wheels may not be
compatible with your Aest scooter. The use of anything other than genuine Aest replacement parts may
affect your safety and will void your warranty.
◆
REPLACEMENT PARTS
The most frequently requested replacement parts are available for purchase at some Aest retail partners.
For the complete selection of replacement parts visit www.enjoybot.com.
WARRANTY
◆
AEST LIMITED WARRANTY
The manufacturer warranties this product to be free of
manufacturing defects for a period of 6 months from date of
purchase. This Limited Warranty does not cover normal wear and
tear, or any damage, failure or loss caused by improper assembly,
maintenance, or storage. This Limited Warranty will be void if the
product is ever:
• u
sed in a manner other than for recreation;
• m
odified in any way;
• r
ented.
The manufacturer is not liable for incidental or consequential loss or
damage due directly or indirectly to the use of this product.
Aest does not offer an extended warranty. If you have purchased an
extended warranty, it must be honored by the store at which it was
purchased.
For your records, save your original sales receipt with this manual.
NEED HELP? Visit our web site for replacement parts, product support, authorized partners and customer service contact information at
www.
.com.
enjoybot
NEED HELP? Visit our web site for replacement parts, product support, authorized partners and customer service contact information at
www.
.com.
enjoybot
