Page 5
4.
Set up Your Equipment
4.1
Camera and Bracket
The camera is fitted with a bracket which is adjustable
for pan and tilt.
Screw or bolt the bracket onto a solid surface. To tilt
the camera, use the allen key to loosen the 6 screws on
the side of the camera. Gently tighten
them up when you have adjusted the
camera angle to your requirement.
Screw the antenna onto the back of
the camera.
4.2
Set up Camera for Operation
The camera can be wired straight into your TV, or alternatively with a wire-
less connection to the TV.
Connect the PP3 connector at the end of the camera power supply unit to the
mating PP3 connector on the Battery Snap. Fit the other end of the Battery
Snap into the power socket at the end of the Camera’s lead. Plug the Power
Supply Unit into a mains socket and switch on..
4.3
Wireless Connection to TV
Screw the Antenna onto one end of the
Receiver. Adjust the angle of the Antenna
so that it is approximately vertical. The
receiver can be mounted vertically using
the screw holes provided, or rested in a
horizontal position.
Fit the 9/12V Mains Power Supply (it has a
cylindrical plug) to the Receiver (DC 9-
12V) and plug it into the Mains. Switch
the power on. The red indicator light will
show it is on.
Page 3
SCREW ANTENNA
ONTO RECEIVER
Содержание C13
Страница 1: ...Page 1 Nature Camera C13 User Guide ...