Enigma Energi Owners Handbook
Page 11 of 24
Part Code: Z20949 (Rev G)
ADJUSTMENTS FOR COMFORT
To adjust the foot rests:
x
To use the foot rest, pull each foot
rest forward until it locks into
position
x
To store the footrest, press the
lever back whilst pushing the
footrest out of position.
To adjust the arms:
x
Push the silver button on the
locking pin whilst at the same time
pulling out the pin. Once the arm
has been adjusted to your positional
requirement, insert the locking pin
with the silver button pressed to
secure.
To adjust the arm rests:
x
Unscrew the handle on the
armrest. Adjust the armrest to the
correct position and screw the
handle back in to secure it in place.
Adjusting the controller position:
x
Unscrew the two bolts on the
controller bracket using a 5mm
Allen key. Adjust the controller to
suit you and replace the bolts using
the Allen key.
Adjusting the seat sling canvas
tautness:
x
Loosen the screws on the sides of
the seat with an Allen key.
Retighten or slacken the seat
sling canvas to suit you and
retighten the screws with the
Allen key.
Adjusting the height of the seat back:
x
To adjust the height of the seat
back, unscrew the two quick
release screws at the bottom of
each push handle. Adjust the
push handles to move the back
canvas up or down until the user
is comfortable. Then fix the push
handles back into place using the
quick release screws.
Adjusting the tautness of the seat
back canvas:
x
To adjust the tautness of the seat
back canvas, first lift the flap at
the back of the canvas which is
held in place with Velcro.
x
You will then see four straps
which determine the tautness of
the canvas. Adjust these until
you are comfortable, then secure
the straps with Velcro.