16
Using the Control Console
Turning Lights On/Off (toggle)
To turn the Merlin elite lights On/Off:
Press and hold the “Marker”
button for more than 5 seconds
***Note: The Merlin elite lights will automatically turn on when it is
first powered on ***
Control Console LED Backlight
To toggle the LED Backlight On/Off on the
Merlin elite
Control
Console:
1. Press the “Power” button on the
Merlin elite
Front Panel for less
than 5 seconds to enter ‘standby’ mode.
2. Press and hold the “Find” button, then press and release the
“Power” button on the Front Panel (this brings the LCD out of
‘standby’ mode).
3. Continue to hold the “Find” button until the Blue LED lights up on
the upper right corner of the Control Console. Once the blue LED
is lit, release the “Find” button.
NOTE: If your
Merlin elite
is plugged into a power strip/surge
protector, make sure the power switch is turned on before
attempting to turn on
Merlin elite
. If the power strip/surge
protector comes with a circuit breaker, make sure the circuit
breaker has been reset before attempting to turn on
Merlin elite
.
