ENHANCED VISION Amigo, Руководство пользователя

Страница: 22 / 36

18
C
hapter
9
t
roubleshooting
No Power:
1. Make sure that both contact pins in the battery
compartment are visible. (see Figure 1) The pins
should protrude out of the housing to make proper
contact with the battery terminals.
2. Make sure the battery is charged and correctly inserted
into the unit. (see page 9 or 16)
3. Press the power button for more than 1 second and
the Amigo should turn on.
4. If the power does not turn on when using the battery,
try using the Amigo with the power supply
(see Using
Amigo with Power Supply on page 10)
. In this case, it
is most likely that the battery needs to be charged.
Amigo Green Light is blinking:
If the green indicator light is blinking fast, then the battery
is very low. Charge the battery by plugging the Amigo
power supply into an AC wall outlet
(see page 9) Note: The indicator
light will continue to blink slowly
while charging, but will turn off when
the battery has fully charged.
Unit turns OFF suddenly:
1. Make sure that both contact pins
in the battery compartment are
visible (see Figure 1).
2. Make sure the battery is charged and correctly
inserted into the unit.
Figure 1
tRoUBleSHootinG