ENGWE-BIKES ENGINEPro, Руководство по эксплуатации и обслуживанию

Страница: 8 / 19

7

Assembly - Step 1: Attach the handlebar subassembly
Stand the main body of the e-bike on the kickstand. Stand up and lock the steering
column that is at the front of the main body frame, insert the stem of the handlebar
subassembly into it. Make sure that the fork (that will hold the front wheel) is
pointing forward, and orient the handlebar accordingly. Insert the stem all the way
and tighten from the top using the quick lock.

Assembly - Step 2: Attach the Front Wheel Fender and the Front Light
Make sure that the fork from the steering column is pointing forward. Place the
front light and the front fender within the fork: locate the small projection with a
screw hole at the top of the fender, fit it to the bolt at the back of the base of the
steering column; attach the supports (one on each side) to the base of the fork
using two small bolts (supplied). After all three points (the dorsal point and the 2
support points) are properly attached, use the multi-tools to tighten.