Page 6
INSTALLATION INSTRUCTIONS
STUDIO
Freestanding Bath
ENGLEFIELD
11) Once the mounting brackets are correctly installed and secured, slide the bath towards
you and lift straight up to remove. Install the waste system (not supplied) to the
manufacturer’s instructions. Please adhere to the relevant sections of NZS 3500
plumbing standard.
The recommended products are:
12) Fill the bath with water before it is securely positioned as to check the supply
connections for leaks. Kohler Co. shall not be liable under its warranty or otherwise for
damage caused by negligence.
13) Reinstall the bath so that it clips into the mounting brackets. Take care not to disrupt
the plumbing connections or damage the underside of the bath. Fill the bath with water
and test for leaks. Repair and repeat steps 11-13 as required.
14) Apply an appropriate silicone sealant, ensuring a watertight seal between the bath and
adjacent surfaces.
Installation complete.
Product
Part Number
99329A-CP
80144A-NA
Pop-up bath waste
Self-sealing trap with
flexible waste pipe
