BEFORE YOU BEGIN
ROUGH-IN
Page 1
INSTALLATION INSTRUCTIONS
SAPPHIRE
TM
Mirror Cabinets
Please read these instructions carefully to familiarise yourself with the required tools, materials, and
installation sequences. Follow the sections that pertain to your particular installation. This will help you
avoid costly mistakes. In addition to proper installation, read all operating and safety instructions.
Prior to installation, inspect cabinet and top to ensure that no damage has occurred in transit. If damage
has occurred, or a visible defect exists, do not proceed with installation, and advise your supplier
immediately.
Please leave these instructions for the consumer. They contain important information.
ENGLEFIELD
Instructions, drawings, and diagrams contained in this manual present information available at the time of printing.
changes without further notice.
Single Door Model
Double Door Model
On-wall installation:
In-wall installation:
760
720
140
450
120
760
720
140
760
120
The cabinets must be fixed to two nogs in the wall.
The nog size should be 50 x 75mm.
If insetting into the wall the cabinets must be fixed
to studs and there must be at least a 20mm gap
between the finished wall and the back of the door.
CONSTRUCTION REQUIREMENTS
80
Positioning of the nog near
vertical centre is recommended,
however exact position will
depend on shelving etc.
80mm from top of
cabinet to centre
of nog.
20
Studs
Finished wall
