Technical Data:
Rated power:
approx. 50 watts at 8 or 16 ohms;
Tubes:
V1(input-tube):
ECC 83 / 12AX7, FQ Grade;
V2, V3: ECC 83 / 12AX7 selected;
V4: ECC 83 / 12AX7, standard;
V5, V6: 5881 (6L6GC) matched set.
Fuses:
external:
1 AT (slow) at 230 Volts;
2 AT (slow) in the 100 and 120 Volts models.
internal:
1,25 AT (slow) at 230 Volts;
2,5AT (slow) in the 100 and 120 Volts models.
Important:
Replace fuses only against same type and rating!
Power consumption:
155 watts max.
Dimensions:
Combo E350 approx. 57,5 x 48 x 27 cm, (22,6 W x 18,9 H x 10,6 T)
Head E355 approx. 57,5 x 27 x 27 cm, (22,6 W x 10,6 H x 10,6 T)
Weight:
Combo: approx. 24 kg (48,4 lbs); Head: approx. 18 kg (39,6 lbs);
Tube array:
WRITE
MIDI
CHANNEL
SWITCH
LOOP 1
SWITCH
LOOP 2
SWITCH
LOOP 3
SWITCH
LOOP 4
SWITCH
LOOP 5
SWITCH
LOOP 6
MIDI SWITCHER
ON/OFF
ON/OFF
Tube Amplifier
The different options for controlling the Classic Tube 50 amp remotely:
1. Two-way footswitch (e.g. ENGL Z-4) and single footswitch (e.g. ENGL Z-3):
Connect it to the amp via a stereo ¼" cord. You will need one two-way footswitch for switching the
Gain mode and V.L.S. (second volume level) and another single footswitch for switching the Reverb.
Functions: Gain mode, V.L.S., Reverb.
2. MIDI-Switcher (e.g. ENGL Z-11):
Connect the Switcher to the amp via a stereo and a mono ¼" cord. The buttons on the Switcher control
Gain Lo/Hi, V.L.S. and Reverb. If you program the diverse switching configurations to different
MIDI program locations (e.g. Gain Hi & Master Lo & Reverb), you can activate the desired configuration
directly via a MIDI board (e.g. ENGL Z-12).
This type of control option is extremely versatile, we recommend it highly if you intend to use the
amp in conjunction with a MIDI system (e.g. MIDI effects devices).
or
1.
2.
Footswitch
F.X. Loop
Send
Return
Balance
Level
Line Out
Frequency
Compensated
Poweramp Output
Dry
Effect
Balanced Line Output
All-tube
Guitar Amplifier
Classic Tube 50
C
ombo:
T
ype
E350
Head
:
T
ype
E355
Amp-Design by
Horst Langer
Made In
Germany
CAUTION !
!
Reverb
Overload
Ground
To Pin 1
Ground
Lifted
Line Out
Ground
REPLACE FUSE
ONLY WITH SAME
TYPE AND RATING !
V.L.S.
Ratio
8
16
Or
16
And
Or->
16
8
Or
8
And
16 Ohms Serial
1 x 16 Ohms (Use Left Jack!)
2 x 8 Ohms
Combo: Internal Speaker
8 Ohms Parallel
1 x 8 Ohms
2 x 16 Ohms
R
Lo/Hi Gain
V.L.S.
DO NOT OPEN !
RISK OF ELECTRIC SHOCK !
DO NOT EXPOSE THIS
EQUIPMENT TO
RAIN OR MOISTURE !
Power
V5
V4
V6
Output
Transformer
Reverb-Connector
Power
Transformer
V3
V 2
V1
