ENGINDOT GSH01B Скачать руководство пользователя страница 17

High Pressure Washers

Limited 24 month warranty

Cold water gas pressure washers

This product is warranted by to be free of defects in workmanship and materials 

 

under normal use.

Specific warranty applies to:  

Spray Wand

Leaks

Pump Is Noisy

Water Leaks

From Pump

(Up To 10 Drop

Per Minute Is

Permissible)

Not enough gas or

engine oil.

Loose fittings.

Thermal protection

device is activated.

Thermal protection device will auto reset.

Do not run pump for more than 5 minutes

without spraying.

Spray wand not

properly attached.

Turn the swivel nut of the gun clockwise

until connection is tight.

Check that hoses and fittings are air

tight. Turn off machine and purge pump

by squeezing trigger gun until a steady

flow of water emerges through the

nozzle.

Check fittings.

Symptom

Cause

Solution

16

 

The warranty period is calculated from the date of purchase by the end user and covers 

cost for replacement parts / equipment and warranty labor per-formed. A copy of the 

original purchase receipt or gift receipt from the original retailer must also accompany 

the war-ranty claim. 

This warranty does not cover:

Rato 209cc engines are warranted for two (2) years on parts and labor.

Pumps and engines are warranted for two (2) years on parts and labor.

Frames,  handles  and  detergent  tanks,  as  well  as  other  structural  components, 

carry a one (1) year parts and labor warranty.

Standard accessories and attachments are warranted for a ninety (90) day period.

Any commercial, industrial or rental use of this equipment will reduce the warranty 

to ninety (90) days.

Merchandise sold as reconditioned, used, demonstration or floor models.

Merchandise purchased on eBay and other online auction web sites.

Содержание GSH01B




















Отзывы: