23
To attach this AP on a wall
1.
Mark the four locations of the mounting holes on the
flat mounting surface..
2.
Drill a 37mm deep 8mm hole in the markings and
hammer the bolts into the openings.
3.
Place the lock and flat washer on the four hex cap
screws and drive these screws to attach bracket of this
Access Point.
4. Attach this device onto the wall by tightening the bolt’s
flat washers and nuts to secure the mounting base to
the mounting surface
3
1
2
4
Содержание EWS370AP
