EWS2910P-FIT Quick Start Guide
Option A: Cloud Management with FitXpress
Step 1: Connecting Ethernet
Connect the Ethernet cable from the EnGenius Fit Switch directly to the
DHCP-enabled network and make sure the Switch can reach the Internet.
Gateway/Router/ Network Switch
DHCP-Assigned IP
Internet
Step 2: Register Device
You can register the access point with the FitXpress app.
1. Open the FitXpress mobile app and create an account.
2. Login and go to the Devices section. Click the Add (+) button.
3. Scan the QR code on the back of the device via the app.
Scan QR-code for device registration
EnGenius Fit PoE Switch
Standalone Configuration
Using your computer, you can connect to the same network (subnet) as the Switch and use the web browser to access
the device’s local web GUI page for configurations whenever the device is set to Standalone mode.